| posted 05/13/2008 at 02:30 am in st george, ut
|
http://www.hotstore188.com/productinfo.asp?id=237
1:8 SCALE GAS POWERED 4WD OFF-ROAD TRUCK
OIL-DAMPENED SUSPENSION TRAVEL
READ-TO-RUN;NITRO 4-WD
2-SPEED TRANSMISSION
TOTAL-ASSEMBLED CHASSIS
SUPER CX15PENGINE FOR CARBURETOR
SUPER MUFFLER AND AIR FILTER
GROUND CLEARANCE(4 INCHES),AND OVER 3 1/2 INCHES OF PLUSH
FRONT AND REAR BEVEL GEAR DIFFERENTIAL
8 SPECIAL OIL-FILLED SHOCK ABSORBER
HARD ALUMINUM ALLOY CHASSIS
2 CHANNEL TRANSMITTER INCLUDED
Specification
--------------------------------------------------------------------------------
LENGTH--------------486mm
FRONT TRACK-------375mm
REAR TRACK--------425mm
WHEELBASE---------300mm
TIRES----------------5.75*3
WHEEL DIAMETER----162mm
FULL SPEED---------50KM/HR
HEIGHT (OVERALL)---264mm
Packing Details
--------------------------------------------------------------------------------
Each car in a color box, 2 pcs in a carton
Carton size: 65*40*61 cm
G.W: 14.00 Kgs
Start the Engine
--------------------------------------------------------------------------------
1. The process of cleaning before driving your car:
For cleaning the engine,1-2 tank oils use is a standard,and then run your car slowly to run out of another 1-2 tank oil,all ways down,the cleaning work is over,the car can run normally;
2. Turning on the transmitter and the receiver:
Extending the antenna of the transmitter and the receiver,and then switch on the transmitter and the receiver in succession; while switching on the receiver,make sure the carburetor is at the neutral position.
3. Fill the fuel:
Filling the special models fuel,and mix the gas and the lubricating oil,the rate of the gas to the lubricating oil is 25:1; close the fuel tanks cover and fasten it after it after filling the fuel.
4. Starting the engine:
Pushing the front valve several times until securely streaming out oil; shut down the wind gate,and turn the accelerograph to the position that spaces 1/4-1/3 place of opening; pull the pulling-start rod until engine send out sound of start to start engineadjust the wind gate to the place which spaces 1/4 poistion of opening position; pull the pulling-started rod quickly; start engine several minutes to prewarm.
5. Stop the engine:
The engine will immediately stop running as long as you press the stall switch of the engine,please refer to the instruction manual(g230 RC) for more details.
More Pictures |
| |
|
| |
| http://www.hotstore188.com/productinfo.asp?id=237 |
|
| |
|
| specific location: beijing |
| posted: 05/13/2008 at 02:30 am |
| expires:
08/21/2008 |
|
| keywords:
Smartech 18 Magic Wheel Gas Powered RC Car |
|
|
|
|
|
|
| |
IMPORTANT USER WARNING!!! |
|
Please avoid scams and fraud by dealing with local individuals only and meet them in person to pay for items. Never provide someone with your personal and financial information (i.e., bank account information, paypal account information, social security number, etc.). |
| How to avoid scams! | If you suspect a scam! |
|
|
